- Reduced price
Purchase case quantity for greater savings!
(available per case of 150 pcs & 1 Each – see below related products)
(available per case of 30 pcs & 150 pcs – see below related products)
70307 Appearance Blue Medium Paste
- COC available at delivery (no charge).
- Non-Hazardous material.
- Shelf life is indefinite when product is stored under ambient conditions.
BOELUBE® is among the trademarks owned by Boeing. These products represent a family of proprietary lubricants developed through Boeing manufacturing operations and lubricant experience.
Near dry machining lubricants can also be formulated into paste forms — BOELUBE® Pastes. In near dry machining the goal is high efficiency, which is achieved as a result of using a minimal quantity of lubricant. Because minimal quantities are used and consumed for the most part in the machining process, BOELUBE® Pastes produce near dry workpieces and chips with little or no clean-up or related costs and no disposal costs.
A metalworking lubricant should impart sufficient lubricity between the tool and the workpiece to cause a significant reduction in friction to occur.
BOELUBE® is a technologically advanced lubricant that significantly reduces friction (one of the major elements in generating heat during the material removal process).
BOELUBE® Pastes are extremely cost effective in single point work such as drilling, reaming and tapping. A minimal amount of paste applied to the tool is all that is required to improve surface finish, yield closer tolerances and extend tool life.
Brush it on or dip tool in paste.
BOELUBE® does not contain Silicone, Sulfur, Halogens (such as Chlorine), Phosphorus, Paraffin Wax, or Petroleum.
BOELUBE® is recommended for use with machining Aluminum, Titanium, Inconel, Stainless Steel, Carbon Fiber Composites (CFRP), Honeycomb, Kevlar, Ferrous and Non-Ferrous materials.
BOELUBE® lubricants are extensively used in the operation of portable positive feed drills.
BOELUBE® lubricants can also be delivered continually through tools with internal channels directly to the cutting edge in drilling, reaming, tapping, and milling applications.